Table of Contents
Advertisement
2.
Plug the PROwatt 150 DC lighter plug into the vehicle cigarette
lighter socket or a 12 volt outlet.
3.
Turn the PROwatt 150 On/Off switch on. The power light indicates
AC power is available at the outlet.
4.
Plug in the AC product you wish to operate.
In the event of an overload, low battery voltage or overheating, the
PROwatt 150 automatically shuts down.
Operating the PROwatt 150
Operating guidelines
The following notes contain hints and describe conditions to be aware of
when you're using the PROwatt 150.
1.
When you connect the unit to the vehicle's 12 volt outlet and turn
the On/Off switch on, the power light illuminates and AC power is
available at the outlets.
2.
As the battery charge is discharged, battery voltage begins to
decrease.
When the PROwatt 150 senses the voltage at its DC input has
dropped to 10.0 volts, it automatically shuts down to prevent
battery damage. The power light goes out, and the fault light
illuminates.
3.
If you connect an AC product that is rated higher than 150 watts,
1.25 amps or it draws excessive surge power, the PROwatt 150 will
shut down. The power light goes out and the fault light illuminates.
9
Advertisement
Table of Contents
