White Bread - Kenwood FP510 series Owner's Manual

white bread

500g(1lb 2oz) strong white bread flour
5mls (1tsp) salt
15g( 1 ⁄ oz) lard
2
15g ( ⁄ oz) fresh yeast or 10mls(2tsp) dried yeast + 5mls (1tsp) caster sugar.
1
2
300mls (11fl oz) warm water, 100mls (3
cold water
1 Dried yeast (the type that needs reconstituting): Add the yeast and
sugar to the warm water. Leave to stand for 5 - 10 minutes until frothy.
Fresh yeast: crumble into the flour
Other types of yeast: follow the manufacturer's instructions.
2 Fit the dough tool or knife blade and add the flour (with fresh yeast if used), salt
and lard. Process for a few seconds to evenly distribute the ingredients.
3 Then with the motor running quickly pour the liquid in a steady stream down
the feed tube until the mixture forms an elastic soft dough. This will take about
45 - 60 seconds.
4 Remove the dough, place in a bowl, cover with an oiled piece of clingfilm or a
plastic bag, and leave in a warm place for 45 - 60 minutes or until doubled in
size.
5 Re-knead by hand for 2-3 minutes. Re-kneading in the bowl is not
recommended as it may cause the processor to become unstable. Shape into
a loaf or 15 rolls and place on greased baking trays and leave until double in
size.
6 Then bake in a pre-heated oven at 230°C/450°F/Gas mark 8 for 20 - 25
minutes for the loaf or 10 - 15 minutes for bread rolls. When ready they should
sound hollow when tapped on the base.
1 ⁄ fl oz) boiling water to 200mls (7
2
1 ⁄ fl oz)
2
7