Navigating - Daikin AGZ 025D Operating & Maintenance Manual

Table of Contents

Advertisement

When the cursor is on a line the highlights will look like this:
If line contains a changeable value>
If the line contains status-only information>
Or a line in a menu may be a link to further menus. This is often referred to as a jump line,
meaning pushing the navigation wheel will cause a "jump" to a new menu. An arrow (
displayed to the far right of the line to indicate it is a "jump" line and the entire line is
highlighted when the cursor is on that line.
NOTE - Only menus and items that are applicable to the specific unit configuration are displayed.
This manual includes information relative to the operator level of parameters; data and setpoints
necessary for the every day operation of the chiller. There are more extensive menus available
for the use of service technicians.

Navigating

When power is applied to the control circuit, the controller screen will be active and display the Home
screen, which can also be accessed by pressing the Menu Button The navigating wheel is the only
navigating device necessary, although the MENU, ALARM, and BACK buttons can provide shortcuts as
explained later.
Passwords
Enter passwords from the Main Menu:
Enter Password, links to the Entry screen, which is an editable screen So pressing the wheel goes
to the edit mode where the password (5321) can be entered. The first (*) will be highlighted,
rotate the wheel clockwise to the first number and set it by pressing the wheel. Repeat for the
remaining three numbers.
The password will time out after 10 minutes, and is cancelled if a new password is entered or the
control powers down.
Figure 5, Password Menu
Main Menu
1/3
Enter Password
Unit Status
Off: Unit Sw
ACTIVE SETPT
Figure 6, Password Entry Page
Enter Password
Enter PW
1/1
Entering an invalid password has the same effect as not entering a password.
Once a valid password has been entered, the controller allows further changes and access without
requiring the user to enter a password until either the password timer expires or a different password is
entered.
OMM 1166-1
44.6F
****
AGZ 025D through 190D
Evaporator Delta T= 10.0F
Unit Status=
Run
)is
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

025d

Table of Contents