Disabling A Pin; Gsm Services; Call Barring (Call Blocking); Caller Id - Motorola MC65 Manual

5 - 8 MC65 Integrator Guide
Tap to confirm the change.
7. OK

Disabling a PIN

Deselect the
1. Require PIN when phone is used
Use the dialer keypad to enter the current PIN.
2.
Tap .
3. Enter
Tap to confirm the change and exit settings.
4. OK

GSM Services

Use the GSM Services tab to configure settings for subscribed phone services. For example, block certain types of
incoming and/or outgoing calls
forward incoming calls to a different phone number
session is in use (page
Tap >
1. Start Settings
Phone Window - GSM Services
Figure 5-4
Select a service from the list and tap
2.
Change services settings as follows.
3.

Call Barring (Call Blocking)

Use call barring to block certain types of incoming and/or outgoing calls. Select the type of incoming and/or
outgoing calls to block.

Caller ID

Enable caller ID to reveal the identity of the person making an outgoing call. Select the
always display the caller ID. Select the

Call Forwarding

NOTE Call Forwarding may not be available on all networks. Check with the service provider for availability.
check box.
(page 5-8), disclose the caller's identity when making outgoing calls
5-9), and set up voice mail and short message service
> > > GSM
Personal Phone
Get Settings...
radio button to prevent the caller's identity from appearing to others.
No one
(page 5-8), receive notification of incoming calls when a phone
.
Services
.
(page
(page 5-9).
radio button to
Everyone
5-8),