Motorola MC65 Manual: Flat Surface Installation

Mobile computer.
Hide thumbs
2 - 26 MC65 Integrator Guide
Insert MC65 into Vehicle Holder
Figure 2-26
Connect the auto charger cable to the MC65 and slide the two locking tabs up to secure the cable cup to the
5.
MC65.
Connect the other end to the cigarette lighter socket.
6.
The LED indicator on the right side of the touch screen lights up orange during charging.
NOTE Prior to removing the MC65 from the vehicle holder, disconnect the auto-charge cable from the MC65.

Flat Surface Installation

Remove the plastic sheet on the bottom of the mounting disc.
1.
Place the disc, sticky side down, on a clean flat surface.
2.
Mounting Disc
Figure 2-27
Fix the suction cup mount to the disc with the suction lever facing up.
3.
Locking Tab

   Also See for Motorola MC65

   Related Manuals for Motorola MC65

Comments to this Manuals

Symbols: 0
Latest comments: