Connecting To The Usb Port (/Usb1); Connecting To The Ethernet Port - YOKOGAWA DX2004T User Manual

Installation and Wiring
Connecting to the Monitor

Connecting to the USB Port (/USB1)

Connecting to the Ethernet Port

Checking the Connection/Communication Status
Checking the Connection on the DX Display
76 76
1.
Turn OFF the DX and the monitor.
2.
Connect the DX and the monitor using an analog RGB cable.
3.
Turn ON the power to both the DX and the monitor. The DX screen is displayed
on the monitor.
Note
• When the DX is turned ON, a VGA signal is always output from the VIDEO OUT terminal.
• The monitor screen may flicker if the DX or another instrument is brought close to the
monitor.
• The edge of the screen may drop out depending on the monitor type.
The USB port complies with Rev. 1.1.
Front
POWER
CF CARD
Ethernet port
Indicator
You can check the connection status of the Ethernet interface with the indicators that are
located above the Ethernet connector of the DX.
Indicator
Illuminated (green)
Blinking (red)
Off
• Checking the Connection at the status indication section of the DX display
You can check the connection status of the Ethernet interface on the Ethernet Link
indicator located on the right side of the status display section of the basic setting
mode display. The basic setting menu appears by pressing MENU to display the
setting menu followed by FUNC for approximately 3 s.
• Checking the Connection Status in the Display Section in the Upper
Right Corner of the Communication Log Display of the DX
You can check the connection status of the Ethernet interface on the Link indicator on
the display section in the upper right corner of the communication log display.
Indicator
Illuminated (green)
Off
Rear
USB port
Do not connect an Ethernet cable whose plug does
not comply with FCC specifications. If you do, the
DX may malfunction.
Connection Status of the Ethernet Interface
The Ethernet interface is electrically connected.
Transmitting data.
The Ethernet interface is not electrically connected.
Connection Status of the Ethernet Interface
The Ethernet interface is electrically connected.
The Ethernet interface is not electrically connected.
USB port
CAUTION
IM 04L45B02-02EN IM 04L45B02-02EN