Setup Example 10: Automatically Transferring The Measured Data File To An Ftp Server - YOKOGAWA DX2004T User Manual

Connecting to an Ethernet Network
Setup Example 10: Automatically Transferring the Measured Data File to an FTP
Server
58
In this example, we will configure the DX so that the measured data is automatically
transferred to an FTP server on the network when the measured data is automatically
saved to the CF card. To automatically transfer the measured data files and report files,
the auto saving of the measured data must be configured in advance (see "Data storage
method" of the setup example 5).
This example assumes that the following network environment is used: DHCP enabled,
automatically obtain the DNS server information, and automatically register the DX host
name to the DNS server. Set the parameters according to your network environment.
Automatic data transfer to an FTP server
DX
Measurement input
Setup Item
Host name
Obtain the IP address
Type of data to be transferred
FTP server
(1) Host Settings and IP Address of the DX
Press MENU (to switch to setting mode), hold down FUNC for 3 s (to switch to basic
setting mode). and select the Menu tab > Communication (Ethernet) > IP address,
Host settings.
(2) Data to Be Transferred to the FTP Server
Select the Menu tab > Communication (Ethernet) > FTP client > FTP transfer file.
FTP server
Internal
memory
Description
DAQSTATION1
Obtain automatically (DHCP)
Acquired measured data
Server name abcdefg.co.jp
Port number 21
Login name FTPUSER1
Password a1234
Ethernet
CF card
Number in the Figure
1
2
3
4
2
Automatically obtain the
DNS server information.
Automatically register the
DX host name to the DNS
server.
1
3
IM 04L45B02-02EN