Table of Contents
Advertisement
SY-P4I845GV/PEISA Plus Quick Start Guide
7. After the BIOS update, please reboot your system and check top-left
corner of POST screen to see the update is successful.
12. After re-flashing the BIOS, my system will not boot-up.
1. Clear the CMOS by shorting Pin2-3 of JP5 for 5 seconds.
2. The BIOS update may not be successful. Contact your local SOYO
branch for BIOS reprogramming service.
13. Is it possible to reprogram my BIOS after an unsuccessful
re-flashing?
Reprogramming the BIOS requires sophisticated equipment and cannot be
performed unprofessionally. Please contact your local SOYO branch for
BIOS reprogramming service.
Graphic Card Issues
15. I cannot set my monitor to higher than 16 colors / 640x 480
resolution.
1. Ensure that you have installed the correct graphic driver for your
operating system.
2. Install the latest VGA driver from your graphic card manufacturer.
16. After waking up from Suspend to RAM or Standby mode, the screen
has no display, but I can hear the hard disk operating.
1. Ensure your VGA card support Suspend to RAM function.
2. Visit the website of your VGA card manufacturer for a driver update or
troubleshooting.
Audio Issues
17. How can I disable the onboard Audio?
41
Advertisement
Table of Contents
