Table of Contents
Advertisement
SOYO SY-P4I845GV/PEISA Plus Quick Start Guide
2
2
Installing the Motherboard
To avoid damage to the motherboard, please follow the instructions below
before handling this equipment:
Before installing the motherboard, ground yourself by touching the unpainted
portion of the system's metal chassis to avoid static damage to system components.
Check the motherboard for observable damage. If any component appears to have
come off or been damaged, please contact our local SOYO customer service center for
an immediate replacement.
Below is a list of integral components needed to install the system:
A Intel Socket 478 CPU* (Pentium 4 Prescott / Pentium 4 / Celeron with 533/400MHz
FSB)
A verified CPU cooling fan/heatsink
1~2 266/333MHz DDR SDRAM modules
2X/4X AGP or PCI graphic card
Well-ventilated computer case
Power supply (at least 350W, ATX 12V approved)
Monitor
Keyboard (PS/2 or USB)
Pointing Device ( USB/PS2 Mouse/Trackball)
Speakers (optional)
Storage Devices: Hard Disk, CD/DVD-ROM/RW, Floppy Drive...
Other Peripherals: printer, modem, scanner (optional)
*
CPUs with Vcore higher than 1.6 volts are not supported.
9
Advertisement
Table of Contents
