Table of Contents
Advertisement
SY-P4I845GV/PEISA Plus Quick Start Guide
5.
If you have more than one memory modules, please insert only one
memory module at a time to identify the defective one(s).
6.
If the above procedures prove fruitless, change the CPU.
6. During boot-up, the CMOS halts on Memory Checksum Error.
1.
Clear the CMOS by shorting Pin 2-3 of JP5 and reboot.
2.
If the problem still exists, re-flash the BIOS.
3.
If the situation does not improve, replace the CMOS battery.
Remember to reconfigure the BIOS after replacing the battery.
4.
If the problem does not result from the dead battery, it is possible that
the BIOS chip is corrupted. Contact your local SOYO branch for repair.
System Instability Issues
7. My system intermittently halts on errors and becomes very unstable.
1.
Clear the CMOS by shorting Pin 2-3 of JP5 and reconfigure the BIOS.
2.
Discard any overclock BIOS/jumper settings and restore to default
settings.
3.
Check the CPU temperature in BIOS menu to see if the CPU has been
overheating. If the result is positive, replace the current CPU cooling
fan/heatsink with a more powerful one.
4.
Check the compatibility of the memory modules with the motherboard.
If possible, replace the current memory modules with verified ones and
reboot.
5.
Update the BIOS to the latest version available at SOYO website.
6.
The power supply might not have enough wattage to support all attached
components. If your system has any dispensable components connected,
like CD-RW, or extra HDD, etc. disconnect them to see if the problem is
gone then.
7. Install chipset driver available on bundled driver CD.
8. Check if your motherboard is shorting out against the case.
9. Check if your memory module timings set in CMOS Setup Utility are
supported by your memory module.
8. My system intermittently hangs during Windows installation.
1.
If there are more than one memory modules, please insert only one
memory module at a time to identify the defective one(s).
39
Advertisement
Table of Contents
