Table of Contents
Advertisement
SOYO SY-P4I845GV/PE Plus Quick Start Guide
The onboard audio can be disabled in CMOS Setup Utility. Please refer to
Quick BIOS Setup in this QSG for know-how.
18. The onboard audio doesn't work at all on my system.
1. Ensure the speakers are connected to the Line-out audio jack and
powered on.
2. Ensure the "Onboard Audio" item is set to "Enabled" in CMOS Setup
Utility.
3.
Install the audio driver from bundled driver CD again or get the latest
audio from audio chip manufacturer's website.
19. The sound system works fine in my system except for playing CD
music in the CD-ROM, when there is no sound at all.
This may result from the loose or even no connection between the CD-ROM
and the onboard CD1 connector. Ensure a 4-wire audio cable firmly connects
the CD-ROM and onboard CD1 connector and try again.
20. The sound and everything else works fine except that the device
connected to Line-in and/or Microphone doesn't work. What is
wrong?
1. Please go to sound driver utility and check if the line-in and/or
microphone are enabled.
2. Check if the device connected to Microphone/Line-in is ok.
21. The added PCI sound Card does not work properly.
1.
Enter SOYO COMBO Setup menu in BIOS and disable "Onboard
Audio" item.
2.
Go to "Integrated Peripherals" in BIOS and disable "Game port
address" and "Midi port address" items.
Hard Disk Drive/Floppy Drive/CD-ROM Issues
22. My hard disk drive is not detected during Power Up Self Test
routine.
Change the jumper settings of the hard drive to cable select or single.
42
Advertisement
Table of Contents
