SOYO SY-P4I845GV Quick Start Manual page 26

SOYO SY-P4I845GV/PEISA Plus Quick Start Guide
ITEM
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
IDE Primary Master/Slave
PIO/UDMA
IDE Secondary Master/Slave
PIO/UDMA
USB Controller
USB 2.0 Controller
USB Keyboard Support
AC97 Audio
Init Display First
IDE HDD Block Mode
POWER ON Function
On board FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
Onboard Parallel Port
Parallel Port Mode
PWRON After PWR-Fail
Game Port Address
Midi Port Address
Midi Port IRQ
FUNCTION
Allow you to enable/disable onboard IDE 1/IDE
2 slots.
Allow you to decide the transfer modes of
multiple IDE devices. Default settings are
recommended.
Allow you to enable/disable USB support for
USB 2.0 and legacy devices such as keyboards &
mouse.
Allows you to enable/disable onboard audio
chip.
Allows you to choose the interface graphic card
in use for fast hardware detection and response.
Allows your IDE hard drive to decide the
optimal number of block read/writes per sector
for maximum hard disk performance.
Allows you to power on the system via hot keys
or mouse movements.
Default is recommended.
Allow you to change hardware addresses of
onboard serial ports to avoid IRQ conflicts.
Default is recommended.
Allow you to change the hardware addresses and
transfer modes of onboard parallel port to avoid
IRQ conflicts.
Allow the system to automatically power up
after power failure.
Reserved to allow you to change the hardware
addresses of onboard Game\Midi ports to avoid
IRQ conflicts. These ports are currently
unavailable on SY-845GV/PEISA Plus.
26