SOYO SY-P4I845GV/PEISA Plus Quick Start Guide
2.6 Clearing CMOS
Wrongly configured CMOS settings may cause boot-up errors or hardware and
software malfunction. In this case, please follow the procedures below to clear the
CMOS to restore default settings.
3
2
1
JP5
1.
Short Pin 2-3 of JP5 jumper as indicated below.
2.
Put the jumper cap back on pin 1-2 to return to default settings.
JUMPER
SHORT CIRCUIT
Short Pin 2-3 for 5
seconds to clear the
JP5
CMOS
Note: The power cord must be detached from the ATX power supply or electric
socket before performing the Clearing CMOS operation.
CHAFAN1
I
Short Pin 1-2 to
retain new
settings
1 2 3
16
OPEN
1 2 3