Table of Contents
Advertisement
SOYO SY-P4I845GV/PEISA Plus Quick Start Guide
ITEM
CPU Feature
Virus Warning
CPU L1 & L2 Cache
CPU L2 Cache ECC
Checking
Quick Power On Self Test
First / Second / Third Boot
Device
Boot Other Device
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
Security Option
APIC Mode
MPS Version Control For OS
OS Select For DRAM > 64MB
HDD S.M.A.R.T. Capability
Report No FDD For WIN 95
EPA LOGO SELECT
Small Logo (EPA) Show
FUNCTION
Adjust CPU settings to meet some old system
requirement such as NT4.0.
If enabled, a warning will pop up when hard
drive boot sector is being written, a virus
protection mechanism to avoid boot sector
infection.
If enabled, CPU L1 & L2 cache will be
utilized to boost system performance.
If enabled, CPU L2 cache will be checked for
errors to ensure data integrity.
If enabled, the system will skip some POST
tests to reduce time needed to boot up.
Press [Enter], [Page Up]/[Page Down], or
[+]/[-] to arrange the boot sequence of certain
device among multiple boot device options.
In the case of no boot device is specified or
failure to detect any boot device, system will
try to boot from other available devices if this
function is enabled.
If enabled, the floppy drive will be sought and
NumLock activated when booting up.
Default is recommended.
When enabled, the speed of keystroke can be
adjusted.
Select the timing when the password is
required to enter the CMOS Setup Utility or to
boot the system.
Default is recommended.
Default is recommended.
Select OS2 only when you are running OS/2
OS. The default setting is Non-OS2
Allow hard drive to perform self test as a
precaution to avoid sudden crash. This
function must be supported by hard drive and
will reduce hard drive performance if enabled.
Default is recommended.
Enable/disable the display of SOYO logo
during POST.
23
Advertisement
Table of Contents
