Backup And Firmware - Teltonika RUT750 LTE User Manual

3. Remote SSH access
Note: The router has 2 users: „admin" for webUI and „root" for SSH. When loging in via SSH use „root".
Web Access control
Field name
1. HTTP Web server port
2. Remote HTTP access
3. HTTPS server port
4. Remote HTTPS access

Backup and Firmware

Router firmware backup, upgrade and settings reset to their factory defaults.
Backup and reset configuration
Backup archive – download current router settings file to personal computer.
Reset to defaults – reset router settings to their default values.
Troubleshoot package
Logging information and configuration– download troubleshoot package to provide to device support team when
facing a problem.
Restore configuration
Restore backup – upload and restore router settings file from personal computer.
Firmware upgrade
Keep settings – when check box is selected router will keep saved user configuration settings after firmware upgrade.
When check box is not selected all router settings will be restored to factory defaults after firmware upgrade.
Image – router firmware upgrade file.
Firmware upgrade – Verify
Compare firmware file checksum to ensure data integrity. If checksum is correct click "Proceed" button below. Wait
until upgrade process completes.
Important notes:
If check box is selected users can access the router via SSH from the outside (WAN). When
check box is not selected users can access the router only from LAN.
Explanation
Specify a port number for routers web management via HTTP protocol. Default port is 80.
If check box is selected users can access the router via the HTTP WEB Interface from the
outside (WAN). When check box is not selected users can access the router only from LAN.
Specify a port number for routers web management via HTTPS protocol. Default port is
443.
If check box is selected users can access the router via the HTTPS WEB Interface from the
outside (WAN). When check box is not selected users can access the router only from LAN.
53