Diagnostics - Teltonika RUT750 LTE User Manual

Additional note on Target & Netmask: You can define a rule that applies to a single IP like this: Target - some IP;
Netmask - 255.255.255.255. Furthermore you can define a rule that applies to a segment of IPs like this: Target – some
IP that STARTS the segment; Netmask – Netmask that defines how large the segment is. E.g.:
192.168.55.161 255.255.255.255
192.168.55.0 255.255.255.0
192.168.55.240 255.255.255.240
192.168.55.161 255.255.255.0
192.168.0.0 255.255.0.0

Diagnostics

Contains Network Utilities used for testing network.
Ping – the utility used to test the reachability of a host on an Internet IP network and to measure the round-trip time for
messages sent from the originating host to a destination server. Enter server IP address or hostname and click "Ping".
Server echo response will be shown after few seconds if server is accessible.
Traceroute – diagnostic tool for displaying the route (path) and measuring transit delays of packets across an Internet IP
network. Enter server IP address or hostname and click "Traceroute". Log containing route information will be shown
after few seconds.
Nslookup – network administration command-line tool for querying the Domain Name System (DNS) to obtain domain
name or IP address mapping or for any other specific DNS record. Enter server hostname and click "Nslookup". Log
containing specified server DNS lookup information will be shown after few seconds. Full manual with all available
"Nslookup" commands and parameters can be found in Linux manual page nslookup(1).
Important notes:

Note that DNS server must be configured correctly if you use server hostname instead of server
IP address in address field.
Only applies to 192.168.55.161
Applies to IPs in range 192.168.55.0-192.168.55.255
Applies 192.168.55.240 - 192.168.55.255
192.168.55.0 - 192.168.55.255
192.168.0.0 - 192.168.255.255
38