Teltonika RUT750 LTE User Manual page 25

PPPoE. This protocol is mainly used by DSL providers:
This is the configuration setup for when you select PPPoE protocol.
Filed name
1. PAP/CHAP username
2. PAP/CHAP password
3. Access Concentrator
4. Service Name
Advanced
These are the advanced settings for each of the protocols, if you are unsure of how to alter these attributes it is highly
recommended to leave them to a trained professional:
Static:
Field name
1. Bring up on boot
2 Disable NAT
3. Override MAC address
Sample Explanation
test Your username and password that you would use to connect to your
your_password carriers network.
isp Specifies the name of access concentrator. Leave empty to autodetect.
isp Specifies the name of the service. Leave empty to autodetect.
Sample value Explanation
On Specifies whether the interface will be configured and brought up
when the router boots up. Disabling will render your WAN
connection non-functional
On/Off Toggle NAT on and off.
00:0C:43:30:50:38 Override MAC address of the WAN interface. If your ISP gives you
a static IP address it might also bind it to your computers MAC
25