Teltonika RUT750 LTE User Manual page 20

Table of Contents

Advertisement

6. Encryption
WPA2 PSK
(CCMP)
7. Bit rate
1.0 MBit/s
8. Country
LT
Additional note: MBit/s indicates the bits not bytes. To get the throughput in bytes divide the bit value by 8, for e.g.
54MBits/s would be 6.75MB/s (Mega Bytes per second).
Associated Stations
Outputs a list of all devices and their MAC addresses that are maintain a connection with your router right now.
This can either be the information of the Access Point that the router is connecting to in Client Mode OR a list of all
devices that are connecting to the router in Access Point mode:
DHCP Leases
If you have enabled a DHCP server this field will show how many devices have received an IP address and what those IP
addresses are.
The picture above shows a DHCP lease for an Android phone that is currently connecting to the routers Access Point.
Backup WAN
When enabled this field will indicate the health of your primary connection:
IN USE
READY
NOT READY
More on this see the main backup WAN section of this manual.
The type of encryption that the router will use to authenticate, establish and
maintain a connection.
The bitrate will be shared between all devices that connect to the routers
wireless network.
Country code.
Indicates that the connection is being used for main traffic.
Indicates that the connection is ready to take over
network traffic, if the other link should fail.
Indicates that the connection is down.
20

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rut700 hspa+Rut750

Table of Contents