Services; Ping Reboot - Teltonika RUT750 LTE User Manual

Services

PING Reboot

PING Reboot function will periodically send PING command to server and waits for echo receive. If no echo is received
router will try again sending PING command defined number times, after defined time interval. If no echo is received
after the defined number of unsuccessful retries, router will reboot. It is possible to turn of the router rebooting after
defined unsuccessful retries. Therefore this feature can be used as "Keep Alive" function, when router PINGs the host
unlimited number of times.
Common configuration
Field name
1. Enable PING Reboot
2. Reboot router if no echo
received
3. Interval between PINGs
4. Retry count
5. Server to PING
Important notes:

Always check if your defined server responds to echo commands before using PING Reboot
function. Otherwise router keeps rebooting after unsuccessful PING echo receive. You can test
PING send at "Network" > "Diagnostics".
Description
This check box will enable or disable PING reboot
feature.
This check box will disable router rebooting after
the defined number of unsuccessful retries.
Time interval in minutes between two PINGs.
Number of times to try sending PING to server
after time interval
unsuccessful.
Server IP address or host name, which will receive
PING from router
if echo receive was
39
Notes
PING Reboot is disabled by
default.
This check box must
unselected if you want to use
PING Reboot feature as "Keep
Alive" function.
Minimum time interval is 5
minutes.
Minimum retry number is 1.
Second retry will be done after
defined time interval.
If you use server host name
instead of the IP address you
must configure DNS server first.
be