Wireless Sniffer Board - Dell XPS M1730 Service Manual

Hide thumbs Also See for XPS M1730:

Table of Contents

Wireless Sniffer Board

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions in the

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface (such as the

back panel) on the computer.

NOTICE:

Handle components and cards by their edges, and avoid touching pins

and contacts.

1 Follow the instructions in "Before You Begin" on page 9.

2 Remove any installed ExpressCards from the ExpressCard slot.

3 Remove the palm rest (see "Palm Rest" on page 49).

4 Disconnect the wireless sniffer board cable from the system board.

5 Remove the screw from the sniffer board and remove it from the computer

base.

Product Information Guide

screw

Wireless Sniffer Board

Table of Contents