Wireless Sniffer Board - Dell XPS M1730 Service Manual

Back to Contents Page
Wireless Sniffer Board
Dell™ XPS™ M1730 Service Manual
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE: Handle components and cards by their edges, and avoid touching pins and contacts.
1. Follow the instructions in Before You
2. Remove any installed ExpressCards from the ExpressCard slot.
3. Remove the palm rest (see
4. Disconnect the wireless sniffer board cable from the system board.
5. Remove the screw from the sniffer board and remove it from the computer base.
1 screw
Back to Contents Page
Begin.
Palm Rest).