Table of Contents
Advertisement
touchmonitor is unplugged or powered off and on. If there is a power failure, the touchmonitor
settings will not default to the factory specifications.
OSD and Power Lockouts
Press and hold the "Menu" and "Up" buttons for two seconds to enable/disable the OSD
Locking feature. When the OSD Locking is enabled, pressing any of the "Menu", "Up", "Down",
or "Select" keys will have no effect on the system.
Press and hold the "Menu" and "Down" buttons for two seconds to enable/disable the Power
Locking feature. When the Power Locking is enabled, pressing the power switch will have no
effect on the system.
User Manual: 1930L/1931L
SW602163 Rev A, Page 22 of 33
Advertisement
Table of Contents
