Table of Contents
Advertisement
On-Screen Display (OSD)
Four OSD buttons are provided on the rear of the monitor to adjust various display parameters.
The same buttons are provided on an optional OSD Control Box which can plug into the RJ-45
connector on the touchmonitor connector panel.
The buttons and their functionality are:
Button Function when OSD is not displayed:
Menu Display OSD main menu
Display OSD Contrast submenu
Display OSD Brightness submenu
Select Display Video Source submenu
Using the OSD buttons controls an on-screen graphical user interface which displays on top of
your input video, allowing intuitive adjustment of the following display parameters:
Parameter
Brightness
Contrast
Clock
Phase
Auto Adjust
H-position
Increase/decrease monitor brightness.
Default: maximum
Increase/decrease monitor contrast.
Default: best gray-shade performance
Allows fine adjustments of the panel's pixel dot clock.
Only applicable for VGA input video
Allows fine adjustments of the panel's pixel dot clock phase.
Only applicable for VGA input video
Automatically adjusts the system clock to the input analog VGA video signal,
affecting the H-position, V-position, Clock, and Phase menu items.
Only applicable for VGA input video
Moves the image horizontally on the display in single-pixel increments.
Default: centered.
Only applicable for VGA input video
Function when OSD is displayed:
Return to previous OSD menu
Decrease value of selected parameter /
select next menu item
Increase value of selected parameter /
select previous menu item
Select parameter for adjustment /
select submenu to enter
Available Adjustment
User Manual: 1930L/1931L
SW602163 Rev A, Page 20 of 33
Advertisement
Table of Contents
