Auto-Configure; Ann-S/Pg Options - Fire-Lite Alarms MRP-2001E Installation, Operation, And Programming Manual

Master Programming Level
PROGRAMMING

1=ANN-S/PG OPTIONS

2=ANN-I/O OPTIONS
3=ANN-80 OPTIONS
ANN-BUS Screen #2
MRP-2001 & MRP-2001E PN 53040:A 4/16/2007

3.5.7.3 Auto-Configure

The ANN-BUS Auto-Configure features allows the programmer to quickly bring all installed
ANN-BUS modules online. The software will search for all ANN-BUS modules and
automatically program the device type and address into the system. Pressing 3 while viewing
ANN-BUS Screen #1 will begin the Auto-Configure process and cause the following screen to
be displayed:
3.5.7.4 ANN-S/PG Options
The Printer Option allows the user to configure the optional printer. Pressing 1 while viewing
the ANN-BUS Screen #2 will display the following screens:
1=PORT
2=PRINTER SUPV
3=OFFLINE TIMER
1=BAUD RATE
2=DATA BITS
3=PARITY
1=STOP BITS
Pressing 1 for Port while viewing Printer Options screen #1 will allow the programmer to select
between a Parallel and Serial Port for printer connection. Each press of the 1 key will cause the
display to toggle between Port PAR (parallel) and Port SER (serial). It is important to note that
the interface selected determines which options are available to the user.
ANN-BUS
AUTO-CONGFIGURE
IN PROGRESS
PLEASE WAIT
Auto-Configure Screen
ANN-S/PG OPTIONS
PARALLEL
Printer Options Screen #1
ANN-S/PG OPTIONS
Printer Options Screen #2
ANN-S/PG OPTIONS
Printer Options Screen #3
Programming
NO
60
N/A
N/A
N/A
N/A
73