Ann-Bus Modules - Fire-Lite Alarms MRP-2001E Installation, Operation, And Programming Manual

Programming

3.5.7.2 ANN-BUS Modules

If an ANN-BUS module is installed, press 2 while viewing ANN-BUS screen #1 to select
ANN-BUS addresses for the module(s). The following screen will be displayed.
Pressing the down arrow key will allow the programmer to view additional screens displaying
Addresses 1 - 8. Pressing the number corresponding to the desired address will display a screen
with technical information about the selected module.
In the technical information screen, pressing 1 for Type will display the following screens:
Press the number corresponding to the module type, if any, that is installed with the selected
address. This will enable the module.
72
ANN-BUS MODULES
1=ADDR. 1
2=ADDR. 2
3=ADDR. 3
On Board DACT Screen #1
ANN-BUS MODULE TYPE
1=NONE
2=ANN-80
3=ANN-I/O
Module Type Screen #1
ANN-BUS MODULE TYPE
1=ANN-S/PG
2=ANN-RLY
3=ANN-LED
Module Type Screen #2
Master Programming Level
NONE
NONE
NONE
MRP-2001 & MRP-2001E PN 53040:A 4/16/2007