Time-Date - Fire-Lite Alarms MRP-2001E Installation, Operation, And Programming Manual

Programming
SYSTEM SETUP

1=TIME-DATE

2=TROUBLE REMIND
3=CHARGR DISABLE
System Setup Screen #2
68
Pressing 2 while viewing the Select Banner Screen will display the following screen:
USER BANNER-LINE 1
PRESS ENTER IF OK
This screen allows the programmer to enter a custom banner. A flashing cursor will appear in
the bottom left corner of the display. A maximum of 20 characters (including spaces) can be
entered into the screen. After entering up to 20 characters in the screen, press Enter to store the
entry. To quickly clear the current banner, press the CLR key.
To enter alphanumeric characters from the keypad, repeatedly press the appropriate key until
the desired character is displayed in the first position. For example, to enter the letter B, press
the 2 (ABC) key three times to toggle through the characters 1, A and B. Press the right arrow
key to move the cursor one position to the right and repeat the process to enter the next
character. To enter a space, press the * (QZ) key four times to place a blank in the desired
position. When all characters have been entered, press the Enter key to store the information.
The display will return to the Select Banner Screen.
3.5.6.3 Time-Date
The control panel time and date can be changed by pressing 1 while viewing the System Setup
Screen #2. The following screen will be displayed:
1=TIME
2=DATE
3=CLOCK FORMAT
1=DAYLIGHT SAVINGS
User Defined Banner Screen
TIME AND DATE
04072006
Time-Date Screen #1
TIME AND DATE
Time-Date Screen #2
MRP-2001 & MRP-2001E PN 53040:A 4/16/2007
Master Programming Level
10:00A
12HR