Ann-Led Board Layout; Specifications; Mounting/Installation - Fire-Lite Alarms MRP-2001E Installation, Operation, And Programming Manual

Installation

2.7.8.1 ANN-LED Board Layout

Figure 2.22 illustrates the ANN-LED board showing locations of screw terminals for
connection to the FACP and the DIP switches for selecting the ANN-BUS ID number.

2.7.8.2 Specifications

• Max. ANN-BUS Voltage: 24 VDC
• Max. Current:
• Operating Temperature: 32
• For indoor use in a dry location only

2.7.8.3 Mounting/Installation

Install the ANN-LED Module as described in the documentation supplied with the annunciator.
42
ANN-BUS (ID#)
Address DIP switch
ANN-BUS Connector
Figure 2.22 ANN-LED Board Layout
Alarm: 68 mA
Standby: 28 mA
o
F to 120
o o o
F (0 C to 49 C)
MRP-2001 & MRP-2001E PN 53040:A 4/16/2007
ANN-BUS Devices