Installation
2.7.9 ANN-RLY Relay Module
The ANN-RLY relay module provides 10 programmable Form-C relays when used with a
compatible FACP.
2.7.9.1 ANN-RLY Board Layout
Figure 2.22 illustrates the ANN-RLY board showing locations of screw terminals for
connection to the FACP and the DIP switches for selecting the ANN-BUS ID number.
2.7.9.2 Specifications
•
Operating Voltage: 24 VDC
•
Max. Current:
•
Relay Contact Ratings:
•
Operating Temperature: 32
•
For indoor use in a dry location only
2.7.9.3 Mounting/Installation
The ANN-RLY relay module can be mounted inside the FACP main circuit board chassis.
44
ANN-BUS (ID#)
Address DIP switch
Figure 2.24 ANN-RLY Board Layout
Alarm: 75 mA
Standby: 15 mA
2.0 amps @ 30 VDC (resistive)
0.5 amps @ 30 VAC (resistive)
o
F to 120
ANN-BUS Connector
o
o
o
F (0
C to 49
C)
MRP-2001 & MRP-2001E PN 53040:A 4/16/2007
ANN-BUS Devices