Gain Control On Video; Automatic Gain On Video - Barco Galaxy NW-12 User Manual

7. Advanced
On the screen appears now a slider box
Image 7-15
8. Use ←or → , the numeric keys on the remote, or the keypad to change the Noise Reduction
7.4.2

Gain control on Video

7.4.2.1

Automatic Gain on Video

Automatic Gain on Video is only for Video signals
Enabling/disabling the Automatic Gain on Video
1. Press MENU to activate the Tool bar
2. Press → to select the Image item
3. Press ↓ to Pull down the Image menu
4. Use ↑ or ↓ to select Settings
5. Press → to pull down the menu
6. Use ↑ or ↓ to select Gain Control on Video
7. Press → to pull down the menu
8. Use ↓ or ↑ to select Auto
9. Press → to pull down the menu
10.Use ↓ or ↑ to enable (ON) or disable (OFF) the Automatic Gain on Video
11. Press ENTER
A white bullet shows the active setting
Image 7-16
The AGC can be disturbing in case of Macrovision encoded signals, therefore the AGC can be disabled (OFF)
at any time
66 R59770288 GALAXY NW-12, GALAXY NW-7 20/06/2013