Table of Contents
Advertisement
RUGGEDCOM RS900L
Installation Guide
Communication Ports
The RS900L can be equipped with various types of communication ports to enhance its abilities and
performance. To determine which ports are equipped on the device, refer to the factory data file available through
ROS . For more information on how to access the factory data file, refer to the ROS User Guide for the RS900L.
Each communication port type has a specific place in the RS900L chassis.
Figure 8: Port Assignment
1. Ports 1 to 6
2. Ports 7 to 8
Port
1 to 6
7 to 8
9
The following sections describe the available ports:
•
Section 3.1, "Copper Ethernet Ports"
•
Section 3.2, "Fiber Optic Ethernet Ports"
•
Section 3.3, "EoVDSL Ports"
Section 3.1
Copper Ethernet Ports
The RS900L supports several 10/100Base-TX Ethernet ports that allow connection to standard Category 5
(CAT-5) unshielded twisted-pair (UTP) cables with RJ45 male connectors. The RJ45 receptacles are directly
connected to the chassis ground on the device and can accept CAT-5 shielded twisted-pair (STP) cables.
Copper Ethernet Ports
2
1
3. Port 9
Type
Fast Ethernet Ports (10/100Base-TX)
Fast Ethernet Ports (10/100Base-TX or 10/100Base-FX)
EoVDSL Port
3
Chapter 3
Communication Ports
13
Advertisement
Table of Contents
