Connections - Panasonic KX-UTG300 Operating Instructions Manual

Installation and Setup

Connections

This section explains the ports and connectors on the unit.
Connections for AC Adaptor/LAN/PC
Clamp
AC adaptor
CAUTION
Optional AC Adaptor
•
Use the following AC adaptor:
–
DSA-42D-48 2 480063 (P/N: 381.00398.005)
•
The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near
the unit and is easily accessible.
When connecting a headset
•
Ensure that the headset cord has slack and is not pulled tight during use to prevent damage to the
connectors.
•
Cords used to connect devices to the EHS jack or headset jack must be less than 3 m (9.8 ft) in
length.
Notice
•
The following headsets can be used with this unit. (Not all operations with the headsets can be
guaranteed.)
–
–
For up-to-date information about headsets that have been tested with this unit, refer to the
following web site:
http://www.panasonic.com/sip
58 Operating Instructions
Headset
EHS headsets/USB headsets
Selected Plantronics -brand headsets
®
Selected Jabra -brand headsets
®
Bluetooth headsets
Optional AC adaptor
To a switching hub (Ethernet cable)
To a PC (Ethernet cable)
To an EHS
Handset
To a handset jack
(handset)
To a headset
Document Version 2014-04