Icons - Panasonic KX-UTG300 Operating Instructions Manual

Before Operating the Telephone
Phone Screen
A
Line Buttons
Line buttons are used to access the lines registered to the unit. Line buttons can be selected by touching
them or by pressing [ ] or [ ]. A maximum of 6 lines can be registered to the unit. The status of line buttons
can be confirmed with the displayed line icons (Page 17).
Call Buttons
Call buttons are used to select calls to or from the unit. Call buttons can be selected by touching them or
by pressing [ ] or [ ]. The status of call buttons can be confirmed with the displayed call icons
(Page 17).
Soft Buttons
Soft buttons are displayed for functions that can be used depending on the screen displayed and the state
of the unit. If
Page 18 for a list of commonly used soft buttons.

Icons

Status Icons
Status icons indicate the status of the unit and are displayed at the top of the screen in the status bar.
Icon
16 Operating Instructions
is displayed, you can touch it to display other available soft buttons. See
More
Displayed when the ringer is turned off (Page 20).
Displayed when [HEADSET] is pressed.
Displayed when the connection to the LAN is lost. If this icon is displayed, check
the Ethernet cable connection.
Displayed when the Bluetooth feature is activated but not connected to a device.
(Page 68).
Description
B
C
Document Version 2014-04