Customizing the Telephone
Entering Characters
The dial keys are used to enter characters and numbers. Each dial key has multiple characters assigned to it.
(For example, a, b and c are assigned to the 1 key.)
To enter a character, press the corresponding dial key until the character you want appears. To enter another
character that is assigned to the same key, first press [ ] to move the cursor to the right.
Example
To enter "desk", press the keys as follows:
Input:
Display:
d
For details about the characters assigned to each key, see "Character Table (Page 52)".
Deleting characters
Touch
to delete the last character entered.
Backspace
Backspace
d e s k
Modifying entered text
Use [ ] and [ ] to move the cursor to where you want to modify the text. Then, modify the text as follows:
•
Touch
Backspace
d e s k
•
Press a dial key to insert a character at the cursor's location.
d e k
Note
•
Depending on the type of information you are entering, you cannot enter certain characters. For
example, when you are entering a phone number, only numeric characters can be entered.
Character Table
Button
/ . @ 1 : ; = ? - _ & %
a b c 2 A B C
d e f 3 D E F
52
Operating Instructions
(right)
d
d
d
d
e
d e s
to delete the character to the left of the cursor.
Backspace
d e k
d e c k
Characters
d e
p
d e
s
d e s
j
d e s
Document Version 2014-04
k