Receiving Calls; Receiving A Call; Rejecting Calls - Panasonic KX-UTG300 Operating Instructions Manual

Receiving Calls

This section explains the basic methods for receiving a
call.

Receiving a Call

1.
Go off-hook.
2.
To end the call, go on-hook.
Auto answer
You can have the unit automatically answer a received
call. The call is connected after a programmed number
of rings.
•
To enable Auto Answer:
On the Phone screen, touch
"Auto-answer is turned on" is displayed.
•
To disable Auto Answer:
On the Phone screen, touch
"Auto-answer is turned off" is displayed.
Note
•
When Auto Answer is enabled,
the line button it was enabled for.

Rejecting Calls

You can reject a received call at your unit or set the unit
to reject certain calls.
Rejecting receiving calls
1.
When receiving a call, touch
Rejecting anonymous calls
You can set the unit to reject calls when the unit
receives a call without a phone number.
To reject anonymous calls, the Block Anonymous Call
setting must be enabled through Web user interface
programming (Page 54). For details, consult your
administrator or dealer.
If the Block Anonymous Call setting is enabled through
Web user interface programming, you must configure
the unit to block anonymous calls.
1.
On the Home screen, select
2.
Press [ ] or [ ] to select "Basic Call Features", and
then press [ENTER].
3.
Press [ ] or [ ] to select "Block Anonymous Call".
Document Version 2014-04
.
AutoAns
.
AutoAns
appears on
.
Reject
.
4.
Touch .
On
Note
•
Rejected phone numbers will not be stored in
the incoming or missed call log.
•
Depending on the line a call is arriving on, the
call may not be rejected.
Rejecting specific calls
You can set the unit to reject specific phone numbers.
Note
•
Rejected phone numbers will not be stored in
the incoming or missed call log.
Adding a phone number
You can store a maximum of 30 phone numbers you
want to reject in the rejection list of the unit.
1.
On the Home screen, select
2.
Press [ ] or [ ] to select "Basic Phone Settings",
and then press [ENTER].
3.
Press [ ] or [ ] to select "Call Block", and then
press [ENTER].
4.
Touch .
Add
5.
Enter the telephone number (max. 32 digits), and
then touch
Save
Note
•
To register additional telephone numbers,
repeat the procedure from step 4.
Adding a phone number from the call log
You can add a phone number by referring to the call log.
1.
On the Home screen, select
2.
Press [ ] or [ ] to select the log type, and then press
[ENTER].
3.
Press [ ] or [ ] to select the entry with the phone
number you want to reject.
4.
Touch .
Save
5.
Press [ ] or [ ] to select "Call Block", and then
press [ENTER].
6.
Touch .
Yes
Note
•
You cannot perform this operation in "Placed
Calls" or on placed calls in "All Calls".
Editing a stored phone number
1.
On the Home screen, select
2.
Press [ ] or [ ] to select "Basic Phone Settings",
and then press [ENTER].
Feature Operations
.
.
.
.
Operating Instructions 23