Panasonic KX-UTG300 Operating Instructions Manual page 64

Installation and Setup
2.
Fasten the wall mounting adaptor to the base with 1 screw. (Recommended torque: 0.4 N·m [4.08 kgf·cm/
3.54 lbf·in] to 0.6 N·m [6.12 kgf·cm/5.31 lbf·in])
3.
Connect the cables to the unit, and run the cables through the wall mounting adaptor, as shown in the
illustration below.
For details about connecting the cables, see "Connections (Page 58)".
Note
•
The cables can also be run from the bottom of the unit.
AC adaptor
64 Operating Instructions
Ethernet cables
37
40 mm (1 / in)
64
or less
Document Version 2014-04