Basic Call Features - Panasonic KX-UTG300 Operating Instructions Manual

ECO Mode
Setting
ECO Mode
Note
•
When ECO mode is enabled, the Speed/Duplex setting (Page 49) for LAN Port and PC Port changes
as follows:
–
Speed/Duplex: "10M-Full"
–
PC port cannot be used.
•
When the ECO mode setting is changed, the unit will restart.
•
When ECO mode is enabled,
Bluetooth
Setting
Enable Bluetooth

Basic Call Features

FWD/DND Setting
If multiple lines are available at your unit, press [ ] or [ ] to select the line to apply the settings to when you
select "FWD/DND Setting" and "Block Anonymous Call".
Setting
FWD/DND Setting
Document Version 2014-04
Description
Enabling this mode reduces the
amount of electricity consumed by
the unit.
is displayed in the status bar at the top of the screen.
Description
Enable or disable Bluetooth for use
with Bluetooth devices.
Sub-Setting
Do Not Disturb
Enable FWD All
FWD All Number
Enable FWD Busy
FWD Busy Number
Description
Enable DND (Do Not Disturb)
to reject all incoming calls.
Enable or disable forwarding
of all incoming calls to a
specified destination.
Specify the number to forward
calls to when "Enable FWD
All" is enabled.
Enable or disable forwarding
of incoming calls to a specified
destination when you are on a
call.
Specify the number to forward
calls to when "Enable FWD
Busy" is enabled.
Customizing the Telephone
Value Range
On, Off
Value Range
On, Off
Value Range
On, Off
On, Off
1-32 digits
On, Off
1-32 digits
Operating Instructions
Default
Off
Default
Off
Default
Off
Off
—
Off
—
45