Table of Contents
Advertisement
Charging The netpad Battery Pack
To charge the battery, attach the battery pack to the netpad and place
the complete netpad in a netpad docking station (for instructions,
please refer to page 41), or place the battery in one of the optional
battery chargers. The standard (850 mAH) netpad battery will nor-
mally be fully charged within 2 to 2.5 hours (3 hours for a 1400
mAH battery pack).
How Do I Check The Battery Power?
To check the battery power, open the Battery icon from the Control
Panel. The Battery tab gives a brief description of the state of the
main battery.
Changing Battery Packs
If you are using your netpad away from the charger and a spare bat-
tery pack is available, you can change batteries when the battery
warning is displayed. To do this:
1. Switch the netpad off.
2. Press on the battery pack latch to remove it.
3. Push in the replacement battery pack.
24
Battery Contact Pins
Figure 2.6 Battery Insertion
Psion Teklogix netpad Win CE 4.0 Quick Start Guide
Battery Pack
Direction of
Insertion
Battery
Latch
Advertisement
Table of Contents
