Turning On And Off - Psion Teklogix netpad Quick Start Manual

Win ce 4.0

Hide thumbs Also See for netpad:

Table of Contents

2.3 Turning On And Off

To switch on:

press the On/Off button on the top.

Note: If the serial cable is connected to the PC and the netpad, the

netpad will automatically switch on when ActiveSync on the

PC is searching for a connection.

To switch off:

press the On/Off button on the top. You can switch off at any

time. You do not have to save your information first, as it is

automatically saved for you.

However, if you are working with a file on the MMC, save the

file before switching off the netpad and removing the card.

Note: If you do not use the netpad, it will automatically switch off

after a few minutes to save battery power. To continue using

the netpad where you left off, switch the netpad on again

using the On/Off button. The power saving options are avail-

able via the Control Panel. The automatic switch-off time

may have different settings, depending on whether the netpad

is in the docking station or not.

Psion Teklogix netpad Win CE 4.0 Quick Start Guide

Table of Contents