Replacing The Light Bulb - Kenmore 385.16677 Owner's Manual

Replacing the Light Bulb
1. Turn off the power switch and unplug the machine.
2. Loosen the face plate set screw, and remove the
face plate.
(_) Face plate
@ Set screw
To remove:
Push and twist to the left.
To attach:
Push and twist to the right.
Reattach the face plate, and retighten the face plate
set screw.
(_ Light bulb
To remove
(_ To attach
NOTE:
* The machine is designed td a 15 WATT
maximum ...... ....
* The light
b_i iii_ @.
when you _ie it. ........... .....
Cleaning Dog
1.Turn off t he_ ;ito a_np_ug the mach*ne.
2. Open the side cover.
3. Remove the needles and presser foot.
4. Remove the needle plate set screw, and remove
the needle plate.
(_ Needle plate
(_ Needle plate set screw
5. Brush out the lint around the feed dogs to the
front by using the lint brush or use a vacuum
cleaner.
6. Reattach the needle plate, presser foot and needles.
Close the looper cover and side cover.
(_) Feed dog
72
®@
?ii!iiiiiiiiil;iii!_i!iiii!i_i{i_ii_ii_iii_ii_iiiiii_ii_iiiii@i_ _,
\1,2,3,4
®
.... l /
O
\5,6
J