Supported Knx Tools; Ets3 Professional; Parameter Settings In Ets Professional; Acs700 Service And Operating Tool - Siemens RDF301 Basic Documentation

ETS3 Professional

Note!
STOP
Note
ACS Service
ACS Operating
Note!
STOP
Siemens
Building Technologies
5.

Supported KNX tools

5.1 ETS3 Professional
ETS3 Professional is an engineering tool. It is used to set up the communication of
the RDF KNX thermostat and assigns the communication object to group
addresses (S-mode).
Only parameters for switching groups will be downloaded to the RDF301.50. All
other parameters are only used for choosing (making visible / hiding) the
communication objects!
This Manual does not describe how to operate ETS3 Professional and commission
a device. Refer to the KNX Manual for more details.
Setting RDF KNX parameters is only supported by ETS3f or higher.
5.1.1

Parameter settings in ETS Professional

For setting the parameters, open the project and select a device.
To start the parameter settings, select Edit, then Edit parameters.
 Only parameters of switching groups will be downloaded to the RDF301
 The tool required is ETS3 Professional version 3f or higher!
5.2

ACS700 Service and Operating tool

With the ACS700 tools, the RDF KNX thermostats can be commissioned (physical
address, application, parameters). They can be operated or monitored via bus
during normal operation.
This Manual does not describe how the physical address is defined. Also, it only
gives a brief overview of the main functionality of ACS.
For more information, refer to the ACS online help.
Setting RDF KNX parameters is only supported by ACS700 Version 5.11 or
higher.
RDF301, RDF301.50 Basic documentation
Supported KNX tools
67 / 80
CE1P3171en
22 Jun 2010