How To Adjust Buttonhole Stitch Density - Kenmore 385.162213 Owner's Manual

If the button is extremely thick, make a test buttonhole.
If it is difficult to fit the button through the test buttonhole,
lengthen the buttonhole by pulling the button holder back to
create a gap (_).
(_) Gap
f
\
o How to adjust buttonhole stitch density
Slide the stitch length control to adjust stitch density,
Slide the stitch length control to 1 for a looser density(_),
Slide the stitch length control to 0,25 for a tighter density
f
® ®
STRETCH '_ / LENGTH
Y ,0_1_2--3--4
J
If the sides of the buttonhole are not balanced, do the
following:
= If the buttonhole looks like ®, use the screwdriver to
move the lever to the right (+) to make the left side
of the buttonhole less dense (see illustration),
otf the buttonhole looks like (_, use the screwdriver to
move the lever to the left (-) to make the left side of the
buttonhole denser
Buttonhole pitch balance adjusting lever
f
®
®
H/
H_
AUTO BH
1
- +
J
... J
78