Buttonhole; Automatic Buttonhole; Preparation For Sewing; To Sew - Kenmore 385.162213 Owner's Manual

SECTION Vii. BUTTONHOLE
Automatic Buttonhole
(_ Stitch selector:
(_ Stitch width:
(_) Stitch length:
@ Needle thread tension:
(_ Presser foot R:
D (BH)
3 to 6,5
0_25 to 1_0
2 to6
Automatic buttonhole foot
o Preparation for sewing
Groove
_) Pin
Attach the automatic buttonhole foot R Make sure the
groove on the foot holder catches the pin on the foot when
lowering the presser foot,
• To sew
(_ Button holder
(_ Buttonhole lever
The buttonhole size is automatically set by placing the
button in the rear of the automatic buttonhole fool
The button holder on the foot takes a button up to 1 0"
(2,5 cm) in diameter
Make a test buttonhole on an extra piece of the fabric to
check your settings,
Use interfacing on stretch fabrics
[] Pull the button holder(_to the back, and place the
button in it, Push it forward tightly against the button,
[] Pull the buttonhole lever_down as far as it will go
f
f
\
f
[]
[]
@
l
®
vm0--1_2--a_
J
J
74