Polycom Desktop V700 Reference Manual page 11

Polycom Desktop V700 Reference Guide
T
he diagram to the left illustrates the Polycom Remote
Control and highlights some of the more commonly used
buttons that are supported in OTN videoconferences.
Call: The call button is used to initiate a point-to-point
videoconference.
Hang up: The hang up button is used to end a point-topoint
videoconference.
Snap: The snap feature should be disabled and is not
supported.
Directory: The directory button is used to access the
Global Address Book.
Directional Arrows / Select Button: The directional
arrows are used to navigate the menu screens. The
select button is used to select an item in a menu.
Home: The home button is used to bring up the menu
screen.
Zoom: The zoom button is used to move the camera
in/out.
Volume: The volume button increases/decreases the
incoming volume.
Far/Near: The far/near buttons are used to switch
between far and near camera modes.
Mute: The mute button mutes the outgoing sounds from
your site.
Auto: The auto feature should be disabled and is not
supported.
Camera: The camera button will allow the user to select
other input devices (i.e. the AMD Patient Camera)
Preset: The preset button is used to set camera and
device presets.
Delete: The delete button is used to delete camera and
device presets.
Number Keys: The number keys are used to select
presets; the corresponding alphabetical keys are used in
the directory to jump to sites starting with each letter
when initiating a videoconference.
Graphics: The graphics button is used to display an
image from a laptop that is connected to the
videoconference system.
2.2 | OTN Training Services