Connecting A Pc To The Unit - Cisco Telepresence System EX60 User Manual

Cisco Telepresence System EX60
Contents Introduction
Calling another (optional feature)

Connecting a PC to the unit

Your EX60 has an HD display, which also may serve as your PC screen. Connect
your PC to the DVI and Mini-jack sockets on the rear panel as shown below.
DVI-D to DVI-I cable is recommended to get a high resolution image.

DVI socket to use the EX60 as a PC screen.

Mini-jack socket for PC audio.
Use as PC screen
If you choose to use your EX60 as your PC screen, connect your PC to the
sockets on the rear panel as shown above.
Your EX60 will then serve as your PC screen outside calls. In a call tap View
desktop to see the desktop.
Your desktop is not exposed to the other side.
D14779.04 User guide EX60, TC4.2, July 2011
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60 Connecting EX60
 
Using EX60 The settings
Calling another (optional feature) Setting the screen resolution
A resolution of 1920 × 1200 is recommended. However, other resolutions may
also be used as shown in the below tables.
Digital input via DVI
1920 × 1200 (recommended)
1920 × 1080
1776 × 1000 (not full screen)
1680 × 1050
1600 × 1200 (not full screen)
1440 × 900
1400 × 1050 (not full screen)
1280 × 1024 (not full screen)
1280 × 960 (not full screen)
1280 × 800
1280 × 768 (not full screen)
1280 × 720 (not full screen)
1152 × 648 (not full screen)
1024 × 768 (not full screen)
960 × 600 (not full screen)
800 × 600 (not full screen)
Screen resolution must be set via the web interface, using the Video Output
HDMI [1] Resolution setting. For details on this, see the EX60 Administrator Guide,
which is available separately for download.
7
User guide
Web interface Contact us
Analog input via DVI
1
920 × 1200 (recommended)
1680 × 1050
1600 × 1200 (not full screen)
1440 × 900
1280 × 1024 (not full screen)
1024 × 768 (not full screen)
800 × 600 (not full screen)
www.cisco.com