Sharing Contents—Conducting Presentations - Cisco Telepresence System EX60 User Manual

Cisco Telepresence System EX60
Contents Introduction
Sharing contents—conducting presentations
Note! You must be in a call to be able to share
contents. Your presentation source must be
powered and active as well as connected. Otherwise
the Presentation icon (button)
will fail to appear.
Tap STOP PRESENTING
D14779.04 User guide EX60, TC4.2, July 2011
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60
You may share
contents while in
a call.
If you have two sources connected,
you will be presented with the
possibility to swap between these at
any time.
to stop sharing
contents.
Using EX60 Using EX60
Once you are in
a call—and the
presentation source
is connected, powered
and active—the Presentation
icon (button) will appear.
In a call tap Presentation ...
20
The settings Web interface
... then tap PRESENT to start sharing contents.
User guide
Contact us
www.cisco.com