Transferring Calls - Cisco Telepresence System EX60 User Manual

Cisco Telepresence System EX60
Contents Introduction

Transferring calls

Call the person to whom the current call
shall be transfered. When you tap the
green call button (not shown), the call will
be transferred.
D14779.04 User guide EX60, TC4.2, July 2011
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60
In a SIP call tap the
name along the bottom
line of the screen.
The call will now be transferred. This will work irrespective of
who initiated the call.
Note that you may combine Transfer with the Hold and Swap
features as much as you want.
This means, for example, that in a call you may:
•
•
•
Using EX60 Using EX60 The settings
... then tap Transfer...
Put your current call on hold and call a second party.
Then initiate a transfer of the one on hold to the second
party.
You may now disengage yourself by tapping END on your
unit.
16
User guide
Web interface Contact us
Now, tap Contacts to
gain access to the call
lists and dial field.
www.cisco.com