Administrator Settings—Ip Settings - Cisco Telepresence System EX60 User Manual

Cisco Telepresence System EX60
Contents Introduction
Administrator settings—IP settings
The IP settings pane for the system lets you specify
whether to use IPv4 (below left) or IPv6 (below right).
D14779.04 User guide EX60, TC4.2, July 2011
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60 Using EX60
32
The settings The settings Web interface
If IPv4 assignment is specified to be
Auto, you must save your settings to
put changes into effect.
Remember to save your settings to
User guide
Contact us
put changes into effect.
www.cisco.com