Table of Contents
Advertisement
Available languages
Available languages
Besure theovenisunplugged andallparts areCOOL b efore replacing t he
oven lightbulb.Donotturntheoven lightonduringaself-cleaning cycle. H igh temperature
will reduce lamplife.
To Change
the
Oven
Light
The oven light automatically turns on when the door is opened (some models). To turn the
oven light on and off when the door is closed, use the OVEN LIGHT switch located on the
control panel.
1.
Turn electrical power off at the main source or unplug the oven.
2.
Wear a leather-faced glove for protection against possible broken glass.
3.
Presswire holder to one side to release the glass shield.
4.
Replace bulb with a new 40 watt appliance bulb.
5.
Replace glass shield in socket and snap wire holder into place.
6.
Turn power back on at the main source (or plug the appliance back in).
7.
The clock will then need to be reset. To reset, see Setting the Clock and Minute Timer in
the ELECTRONICOVEN CONTROL section of this manual.
Changing
Oven
Light
When first using the oven, be sure to follow recipe times and temperatures. If you think the
oven is too hot or too cool, the temperature can be adjusted. Before adjusting the oven
temperature, test a recipe by using a temperature set higher or lower than the recommended
temperature. The baking results should help you to decide how much of an adjustment is
needed.
To Adjust
the Oven
Temperature:
1.
Push BAKE.
2.
Set the temperature to 550°F/288°C by pushing the UP AR-
ROW.
3.
Within 2 seconds, push and hold BAKE for approximately 5
seconds until the special 2 digit display appears. Release BAKE.
The display now indicates the difference in degrees between
the original factory temperature setting and the current tem-
perature setting. If the oven control has the original calibration,
the display will read "00".
4.
The temperature can now be adjusted up or down 35°F/21°C,
in 5°F/3°C increments, by pushing the UP or DOWN ARROW.
Adjust until the desired amount of degrees offset appears in the
display. When adjusting for a cooler temperature, a minus sign
(-) will appear before the number in the display.
5.
When you have made the desired adjustment, push CLEAR
OFF to go back to the time of day display.
Adjusting
Oven
Temperature
NOTE: The adjustments
made will not change the
self-cleaning temperature.
Fr_
Z
0
35
Advertisement
Chapters
Table of Contents
