Table of Contents
Advertisement
Compro TN1500/TN1500W
browser action during the process as doing so may cause problems to your camera system.
Reset All Settings to Default
This will reset IP camera to its factory default settings, producing the same result as pressing the hardware
reset button at the back of camera. If you need to perform hardware reset, refer to the Troubleshooting
chapter.
Firmware Update
You can download the latest firmware from Compro's website (www.comprosecurity.com/en/supports.html).
After downloading the firmware, please log in to the setup page of your IP camera and click [Maintenance]
on the top menu and then look for firmware update section. Press the [Browse] button and locate the
downloaded firmware file and press [Upgrade] button to update camera firmware. Once the update process
begins, it must not be interrupted.
If you log in to the live view page after camera is rebooted and find that some icons are in the wrong place,
try pressing [Ctrl] + [F5] to force a cache refresh of your browser.
8-2 Maintenance
Caution!
You may only cross-import profile among identical camera models.
Figure 8-2. Firmware update
Caution!
Before updating firmware, please close all other browser windows and
background applications that are consuming network bandwidth.
Note:
Should you inadvertently close the browser window during firmware
upgrade, DO NOT unplug the power cable or reset the camera
immediately. Instead, try waiting for 3-5 minutes to see if the camera can
complete the upgrade process, as the new firmware might have been
successfully uploaded to the camera system and is still in the process of
being written into the flash memory.
Advertisement
Table of Contents
