Setup Network Camera From Pc And Installation Cd - COMPRO TN1500 User Manual

Compro TN1500 / TN1500W

Setup Network Camera from PC and Installation CD

Connect an Ethernet cable between your PC and your network switch/router.
Connect an Ethernet cable between your network camera and your network switch/router.
If you are installing a Compro TN1500W, attach the supplied wireless antenna to the connector provided
on the back of the camera.
Attach the power adapter to the camera's power connector and connect the power plug to a power
outlet.
Complete the cable connection, we provide 2 ways to add your camera:
•
•
3-4 Connect the Cables
Figure 3-1. Connection of cables
Login to C4Home website (www.c4home.com) and add camera to the list. C4Home website not
support the wireless setup of network camera. Please use C4Home app or installation CD for
wireless setup.
Insert the installation CD to your CD/DVD drive, and running the iWizard.exe to install IP camera.
Caution!
•
When you unplug the power plug from the wall outlet while the
camera is still in operation, wait for 4 seconds before plugging the
power plug back in the wall outlet. And avoid too frequent plugging
and unplugging of power cable.
•
If the power cable and the network cable connected to the camera
are not securely fastened, it could lead to unstable connection.
Note:
You can add more Compro cloud network camera to your account for
management. C4Home
installed.
app allow maximum 16 network cameras
TM